D-XTR-DY-A-24 PREPARATION STORE, D-XTR-DY-A-24 REAL EXAM ANSWERS

D-XTR-DY-A-24 Preparation Store, D-XTR-DY-A-24 Real Exam Answers

D-XTR-DY-A-24 Preparation Store, D-XTR-DY-A-24 Real Exam Answers

Blog Article

Tags: D-XTR-DY-A-24 Preparation Store, D-XTR-DY-A-24 Real Exam Answers, VCE D-XTR-DY-A-24 Dumps, Instant D-XTR-DY-A-24 Access, Reliable D-XTR-DY-A-24 Dumps Free

You will fail and waste time and money if you do not prepare with real and updated EMC D-XTR-DY-A-24 Questions. You should practice with actual D-XTR-DY-A-24 exam questions that are aligned with the latest content of the D-XTR-DY-A-24 test. These EMC D-XTR-DY-A-24 exam questions remove the need for you to spend time on unnecessary or irrelevant material, allowing you to complete your D-XTR-DY-A-24 Certification Exam preparation swiftly. You can save time and clear the Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) test in one sitting if you skip unnecessary material and focus on our D-XTR-DY-A-24 actual questions.

EMC D-XTR-DY-A-24 Exam Syllabus Topics:

TopicDetails
Topic 1
  • XtremIO X1 and X2 Hardware Fundamentals: For storage systems engineers and administrators, this section of the exam covers identification and description of XtremIO X1 and X2 hardware components, cluster offerings, and field-replaceable units (FRUs).
Topic 2
  • XtremIO X1 and X2 Solution Integration: For solution architects and integration specialists, this domain covers recoverPoint, VPLEX, and AppSync options, considerations, limitations, and use cases
Topic 3
  • XtremIO X1 and X2 Initial Configuration: For storage system administrators and configuration specialists, this part of the exam covers XtremIO Management Server (XMS) installation options, requirements, and deployment considerations.
Topic 4
  • Oracle and VDI deployment challenges, best practices, and considerations in XtremIO environments.

>> D-XTR-DY-A-24 Preparation Store <<

EMC D-XTR-DY-A-24 Exam Dumps - Reliable Way To Get Success

Professional certification can not only improve staff's technical level but also enhance enterprise's competition. Valid EMC D-XTR-DY-A-24 latest exam cram pdf will be necessary for every candidate since it can point out key knowledge and most of the real test question. D-XTR-DY-A-24 Latest Exam Cram pdf provides you the simplest way to clear exam with little cost.

EMC Dell XtremIO Deploy Achievement Sample Questions (Q12-Q17):

NEW QUESTION # 12
A new XtremlO X2-S single X-Brick cluster has been installed into a systems administrator's environment. The administrator needs assistance with configuring a group of volumes with the largest capacity possible.
What is the largest size supported for each volume?

  • A. 2 PB
  • B. 64 PB
  • C. 64 TB
  • D. 1 PB

Answer: C

Explanation:
The largest size supported for each volume in a new XtremIO X2-S single X-Brick cluster, as per the Official Dell XtremIO Deploy Achievement documents, is 64 TB. This information is verified through the official documentation which outlines the capabilities and specifications of the XtremIO X2 systems. The documents provide a detailed description of the critical components, features, and implementation solutions in customer environments, which includes the storage capacity specifications for XtremIO systems1.


NEW QUESTION # 13
What is a required parameter when initializing a cluster for the first time with the create-cluster command on an XtremIO X2?

  • A. profile
  • B. cluster-psnt
  • C. package
  • D. hw-package

Answer: B

Explanation:
When initializing an XtremIO cluster for the first time using the create-cluster command, it is essential to provide the cluster's unique identifier, known as the cluster-psnt (Product Serial Number Tag). This parameter ensures that the system can accurately identify and manage the cluster throughout its operational lifecycle.
Other parameters, such as hw-package, profile, and package, may be relevant in different contexts, but the cluster-psnt is a mandatory parameter for initial cluster creation.
References:
* Dell XtremIO Deployment and Learning Course Materials
* XtremIO X2 Installation and Setup Guide


NEW QUESTION # 14
You are connecting a VMware cluster to an XtremlO array. The host will be connected to the array using QLogic Fibre Channel HBAs. Based on best practices, what is the recommended value for the Execution Throttle?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

Explanation:
When connecting a VMware cluster to an XtremIO array using QLogic Fibre Channel Host Bus Adapters (HBAs), the recommended value for the Execution Throttle is typically set to 4096. This setting controls the maximum number of outstanding I/O operations that can be sent to a Fibre Channel port.
Here's how to apply this setting:
Access HBA Settings: Log into the VMware host and access the settings for the QLogic Fibre Channel HBA.
Locate Execution Throttle: Find the parameter for the Execution Throttle within the HBA settings.
Set Value: Change the value of the Execution Throttle to 4096. This is the recommended setting to balance performance and resource utilization.
Save and Apply: Save the changes and apply them to the HBA. A reboot of the host may be required for the changes to take effect.
Verify Configuration: After the host is back online, verify that the new Execution Throttle setting is active and functioning as expected.
Monitor Performance: Monitor the performance of the host and the storage array to ensure that there are no adverse effects from the change.
Consult Official Documentation: For the most accurate and detailed instructions, always refer to the official Dell XtremIO Deploy Achievement document1. This document will provide the authoritative guidance on HBA settings and best practices for connecting to an XtremIO array.
It's important to note that while the value of 4096 is a common recommendation, the optimal setting may vary based on the specific environment and workload. Therefore, it's essential to refer to the latest Dell XtremIO documentation and possibly consult with Dell support for the most current and tailored advice.


NEW QUESTION # 15
A systems administrator is powering up a XtremIO X2 multi X-Brick cluster. Which components will automatically power-up when the rack PDUs are turned on?

  • A. InfiniBand switches and physical XMS
  • B. DAEs and Storage Controllers
  • C. Storage Controllers and InfiniBand switches
  • D. DAEs and InfiniBand switches

Answer: B

Explanation:
When powering up an XtremIO X2 multi X-Brick cluster, both the Disk Array Enclosures (DAEs) and the Storage Controllers will automatically power up once the rack Power Distribution Units (PDUs) are turned on. This process ensures that the essential components for storage and data management are operational immediately, facilitating a seamless startup of the storage environment. The DAEs contain the SSDs for data storage, while the Storage Controllers manage the data operations, ensuring high performance and reliability.
Reference:
Dell EMC XtremIO X2 documentation explains that upon powering the PDUs, the DAEs and Storage Controllers automatically power up as part of the system's startup process


NEW QUESTION # 16

You need to install an XtremlO X1 at a customer's location and want to ensure the correct communication cables are connected to the back of the X- Bricks. Match the cables to their numeric label shown in the exhibit.

Answer:

Explanation:

Explanation:

The image provided shows the back of an XtremIO X1 storage system with numeric labels next to the communication cable ports. To ensure the correct communication cables are connected:
* Locate the ports on the back of the X-Bricks corresponding to the numeric labels.
* Match each communication cable to its respective port based on the numeric label:
* The right-side Battery Backup Unit (BBU) communication cable for X-Brick 5 (X5-BBU-COM-R) connects to port labeled 3.
* The left-side BBU communication cable for X-Brick 5 (X5-BBU-COM-L) connects to port labeled 1.
* The right-side BBU communication cable for X-Brick 6 (X6-BBU-COM-R) connects to port labeled 4.
* The left-side BBU communication cable for X-Brick 6 (X6-BBU-COM-L) connects to port labeled 2.
* After connecting the cables as per the matching, verify the connections according to the Official Dell XtremIO Deploy Achievement document to ensure they are correct and secure1.
For the most accurate and up-to-date information, please refer to the latest Official Dell XtremIO Deploy Achievement documents or consult with Dell support.


NEW QUESTION # 17
......

With a vast knowledge in the field, DumpsQuestion is always striving hard to provide actual, authentic EMC Exam Questions so that the candidates can pass their Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) exam in less time. DumpsQuestion tries hard to provide the best Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) dumps to reduce your chances of failure in the Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) exam. DumpsQuestion provides an exam scenario with its EMC D-XTR-DY-A-24 practice test (desktop and web-based) so the preparation of the Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) exam questions becomes quite easier.

D-XTR-DY-A-24 Real Exam Answers: https://www.dumpsquestion.com/D-XTR-DY-A-24-exam-dumps-collection.html

Report this page